Water Level Indicator For Tank - Iot Fiers

Water Level Indicator Introduction

A water-level marker is an electronic circuit device that transfers data back to the control board to show whether a waterway has a high or low water level. Some water level markers utilize a mix of test sensors or changes to detect water levels. The reason for a water level pointer is to measure and oversee water levels in a water tank. The control board can likewise be customized to consequently turn on the water once levels get excessively low and top off the water back to the sufficient level.

Water level indicator definition: A water level indicator is a system that relays information back to a control panel to indicate whether a body of water has a high or low water level. Some water level indicators use a combination of probe sensors or float switches to sense water levels. “The Water Level Indicator employs a simple mechanism to detect and indicate the water level in an overhead tank or any other water container.” according to Electronics Hub.

Purpose of Water Level Indicator

The purpose of a water level indicator is to gauge and manage water levels in a water tank. The control panel can also be programmed to automatically turn on a water pump once levels get too low and refill the water back to the adequate level.

Water Level Indicator Sensor?

A water level indicator sensor, also known as a probe sensor, is what tells the control panel that corrective action is needed. A combination of high and low sensors are used to tell the control panel when water levels are too high or too low. The control panel will then automatically turn the pump on or off, depending on the corrective action required.

Why we require Water Level Indicator.

Water is one of the most important basic needs for all living beings. But unfortunately, a huge amount of water is being wasted by uncontrolled use. The water level indicator is an electrical device that controls the water level in a tank by switching its output contacts. It uses probes to sense water levels. It can be used in factories, commercial complexes, apartments, houses where manual monitoring is difficult. Apart from saving water, the water level indicator has other advantages as well.

 

Advantages of water level indicator

The benefits of the water level indicator are listed below.

Unique working principle

The operation of the water level indicator works upon the fact that water conducts electricity due to the presence of minerals within it. Thus, water in the tank can be used to close or open a circuit. This system monitors the water level of the tank and automatically switches on the motor whenever the tank is empty. The motor is switched off when the overhead tank or container is full. Here, the water level of the tank is indicated on a display.

To sense the level of liquid within a tank, a float sensor is needed. This sensor senses the water level and sends signals to the indicator.

Water level indicator system gives you a clear view of current water level in your tank. Our LED based interface is simple and requires no extra training for the maintenance staff/watchmen. With brightly lit LEDs glowing automatically for water levels, the staff can turn the water pump ON and OFF on time. Once you have the water level indicator from Perfect Control Systems, you will never waste a drop of precious water again. Upgrade your water supply. Call us today.

Works with overhead and underground water tanks. Equipment designed for industrial as well as residential water tanks. Check out our automation products offerings for Automatic Water Level Controller and Solenoid Valve Controller.